Skip to main content
WhatSSDFits.com
Every Device. Every Interface. Every Era.
HP logo

SSD for HP ProLiant DL20 Gen10 Plus (DL20 Gen10+)

2021–2022

Form Factor: 3.5-inch SATAInterface: SATA IIIMax Capacity: 16TB
Upgradeable

Quick answer

The HP ProLiant DL20 Gen10 Plus (DL20 Gen10+) is matched with WD Gold 10TB HDD, WD Gold 16TB Enterprise, WD Gold 2TB Enterprise, WD Gold 4TB Enterprise, WD Gold 8TB Enterprise. Compatible storage type: 3.5-inch SATA SATA III. Capacity guidance: up to 16TB. Before buying, confirm your exact model number, storage interface, physical size, and connector/keying. Listings are from eBay and Amazon and may change.

Compatible SSDs for the HP ProLiant DL20 Gen10 Plus

  • WD Gold 10TB HDD

    (WD101KRYZ)
    3.5-inch SATASATA IIIRead 260 MB/sWrite 260 MB/s10TB
    HIGH

    WD Gold 10TB HDD1 listing

    $150.00Open boxebay

  • WD Gold 16TB Enterprise

    (WD161KRYZ)
    3.5-inch SATASATA IIIRead 262 MB/sWrite 262 MB/s16TB
    HIGH

  • WD Gold 2TB Enterprise

    (WD2005FYYZ)
    3.5-inch SATASATA IIIRead 250 MB/sWrite 250 MB/s2TB
    HIGH

  • WD Gold 4TB Enterprise

    (WD4003FRYZ)
    3.5-inch SATASATA IIIRead 255 MB/sWrite 255 MB/s4TB
    HIGH

  • WD Gold 8TB Enterprise

    (WD8004FRYZ)
    3.5-inch SATASATA IIIRead 272 MB/sWrite 272 MB/s8TB
    HIGH

Listings and prices are pulled from eBay and Amazon and may change. Always verify compatibility — confirm your exact model number, storage interface, physical size, and connector/keying — before purchase. Last checked July 22, 2026.

SSD Upgrade Guide for the HP ProLiant DL20 Gen10 Plus

This device uses a 3.5-inch SATA drive with a SATA III interface. Maximum supported capacity is 16TB.

This device supports SATA SSDs. While slower than NVMe, SATA SSDs are still a major improvement over traditional hard drives.

Always power off your device and disconnect power before replacing storage.

Frequently Asked Questions

What SSD fits the HP ProLiant DL20 Gen10 Plus (DL20 Gen10+)?

The HP ProLiant DL20 Gen10 Plus (DL20 Gen10+) is matched with WD Gold 10TB HDD, WD Gold 16TB Enterprise, WD Gold 2TB Enterprise, WD Gold 4TB Enterprise, WD Gold 8TB Enterprise. It supports 3.5-inch SATA SATA III. This device supports up to 16TB based on our records. Before buying, confirm your exact model number, storage interface, physical size, and connector/keying.

How do I verify SSD compatibility?

Verify your full model number against the device page, then confirm the physical form factor (3.5-inch SATA), interface (SATA III), and M.2 keying if applicable. Compare against your existing drive or manufacturer specs before purchase.

Can I use NVMe if my device originally had SATA?

The HP ProLiant DL20 Gen10 Plus (DL20 Gen10+) is recorded with a SATA-class interface (3.5-inch SATA SATA III). NVMe drives typically require an NVMe-capable M.2 slot and matching keying — do not assume NVMe works if your model only supports SATA. Check your exact model and slot before buying.

Does physical size and keying matter?

Yes. M.2 drives vary by length (e.g. 2280) and keying (B-key, M-key, B+M). 2.5-inch and other form factors must match the bay or adapter your device accepts. The HP ProLiant DL20 Gen10 Plus (DL20 Gen10+) is documented as 3.5-inch SATA SATA III — a drive with the wrong size or key will not fit or work.

Are these listings live and current?

Listings and prices are pulled from eBay and Amazon and may change at any time. We refresh marketplace data regularly, but always verify the listing title, condition, and seller before purchase.